3/17/2024 0 Comments Orbit sprinkler heads adjustment![]() ![]() For outdoor irrigation use with cold water only. Recommended operating pressure is 60 PSI. The Voyager II replaces rotors from Orbit, Hydro-Rain, and other major brands. ![]() MPT Funny Pipe fittings, swing fittings and risers. male pipe thread (MPT) Blu-Lock combination swing joint, although it is compatible with 3/4-in. The state-of-the-art approach to mounting a Voyager II is on a 3/4-in. The can and riser stem are made from high impact ABS and metal components are made from stainless steel.Īdjustment of both the radius and arc requires the included gear-drive rotor key. It also includes a bottom inlet filter which helps prevent clogging of the nozzle. It includes a radius adjustment screw which allows you to reduce the rotor throw down to 75% of its rated distance. It also includes a matched-precipitation nozzle rack with 1.0, 2.0, 3.0, 4.0 standard and low-angle nozzles featuring a unique keyway design to ensure highly uniform close-in and far-out watering, as well as an 8.0 GPM pasture nozzle. In this video we run through the adjustment features of the Orbit Compact Gear Drive sprinkler.Learn more about the sprinkler here. This very low rate reduces the risk of runoff or puddling for many soil types and conditions. It comes with a pre-installed 3-gallon-per-minute (GPM) nozzle which results in a full-pattern precipitation rate of 0.24 in. pop-up height ensures that the nozzle clears tall grass. Here Ill show you how to move a sprinkler hea. Its arc is adjustable from 40 to 360 degrees in precise increments, which gives you the ability to aim it so that the water hits the landscape only and avoids any hardscape surfaces. After installing some trees on the side of my yard, I had to relocate and readjust one of the sprinkler heads. For outdoor irrigation use with cold water only.The Voyager II gear-drive rotor is engineered specifically to water landscape areas which require a throw distance of up to 35 ft. Position one collar on the ultimate right and one on the. Slide the direction collars to customize the spray pattern. Compatible with Orbit, Hydro-Rain and Hunter gear-drive rotors. For orbit sprinkler head adjustments of impact sprinklers follow this super easy guide: Close the supply of water to the sprinkler You will see two collars attached to the sprinkler head. The flow and spray easily adjust from 10-15 feet in diameter using the flow. This sprinkler head features a 1/2 inch threaded inlet and a brass flow-adjustment screw allows you to adjust the spray distance. The Saturn III® and Voyager adjust with a standard slotted screwdriver and do not require a key. The Orbit Plastic 1/2-Pattern Flush Sprinkler Head mounts flush with the ground and features a brass nozzle with a 1/2-circle spray pattern. To raise the riser stem when the water is off, insert the plastic tee side of the tool into the rectangular slot, turn 90 degrees, and lift. To adjust the radius, put the Allen key into the arrow and turn clockwise to decrease the radius and counterclockwise to increase it. Note that the right side is fixed, so the adjustments will increase or decrease the left stop. To adjust the arc, insert the plastic tee side of tool into the circle with the +/- and rotate clockwise to increase the arc and counterclockwise to decrease it. In a pinch you can also use a 3/32 Allen key for radius adjustment only. ![]() To decrease the spray pattern, twist the screw towards the minus symbol, or counterclockwise. Then, twist the screw towards the plus symbol, or clockwise, to increase the spray pattern. ![]() The stem rises 1-3/4 inches above the sod level and conveniently drops into the riser when not in operation. The nozzle has an adjustable-flow screw and sprays a distance up to a 15 foot radius. Place it on the screw on the top of the head. The Orbit Brass Pop-Up Sprinkler features a gravity head made from solid brass and a brass half-pattern nozzle. The tool consists of a 3/32 Allen key for adjusting the radius, two finger loops for gripping, and an arc adjustment key. Adjust the arc adjustable tab with a screwdriver. The tool consists of a 3/32 Allen key for adjusting the radius, two finger loops for gripping, and an arc adjustment key. SPRINKLER AND IRRI- GATION SYSTEMS COMPRISING WATER PIPE AND FITTINGS USED. The Saturn IV and Voyager II gear-drive rotor sprinkler adjustment key is engineered for adjusting the arc and radius, as well as for raising the riser stem when the water is off. The Saturn IV and Voyager II gear-drive rotor sprinkler adjustment key is engineered for adjusting the arc and radius, as well as for raising the riser stem when the water is off. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |